Dental LED Clinic Polishing Dust Collector Grinding Sandblaster Vacuum Cleaners

Description

1.Three modes
Strong, light and off modes for suction power and LED lights
2.
3V 4x60MA LED Lights
The lights are working together with motor
3.
Filter
The filter can be cleaned or replaced in case of frequent use
4.induction
This machine has induction starting function（free hands mode),and manual single function mode at the same time.
5.
Applicable scenarios
This product is suitable for the adsorption and removal of dust and smoke caused by the polishing of handicrafts.When removing,it is
filtered by PM 2.5 filter element,so that dust and other things remain in the filter lattice
Power supply: 14.8V 2600MAH
Adaptor：16.8V 800mA
Power: 60W
Motor: 12V 3.4A
Lighting: 3V 4×60MA
Machine size: 11 ×8.
5
×
11
(inch)
Weight:
2.42
KG
Charging
voltage
：
110V~240V.
Installation and Use Method
1.The machine does not need to be installed
2.Use Method
1 Charging:AZDENT the adapter into the power port(110V~240V).
and AZDENT the output side of adapter into the charging port.The
adapter will show green
light
when hot charging,red light when charging,and green light when fully charged.This machine can work while charging.
Note:1The machine can be plugged into the charger when working.
2 It takes about 4 hours from fully discharged to fully charged.
Maintenance and Storage
1.Do turn off and disconnect the machine from the power supply
when not in use.
2.Do disconnect machine and let it cool before cleaning and
maintenance.
3.When cleaning,use a soft cloth to dip a small amount of water and
detergent to gently wipe the surface.It is strictly forbidden to use
alcohol,gasoline,banana oil,xylene and other solvents for cleaning
to avoid yellowing or corrosion of the shell.The product should be
dried,packaged and stored in the original packaging.This appliance
should be stored in a well-ventilated warehouse below 40C°.The surrounding area of the machine should be free of corrective gas.